Ben

$50 - Thomson X2 - 100mm, 10*, black - the "paint" (these don't seem to be hard anodized) has flaked a little around the cap area.. I don't think there's anything noticeable once installed

$50 - Thomson Elite 31.6 zero setback - I think I trimmed it from whatever the original length was, but the minimum insertion line is still about where it normally is, so it must not have been much - 270mm from bottom to rails

$200 - SRAM S30 Race 10-speed clincher set - decals removed, some rubbing on the rim from tire guide rub when I let the pads get a little too low

$20 - 6700 front der, really good condition, 31.8 clampon

$15 - IRD CD front der, really good condition, braze-on, no centering plate (came off an adapter)

$300 - Easton EC90 Aero tubular - '11-'12 vintage (estimate), stripped and re-clear coated, some measurable wear in the brake tracks, hubs fully rebuilt

$300 - Klein Quantum, '00 if I remember correctly. Blue. 54cm top tube. Frame does have two very light dents, one in the TT and one in the driveside seat stay. VERY minor dents, no paint cracking or anything. Some scratches and a few chips in the paint, which I lazily touched up with blue modeling paint just to hide the red primer, but the frame is actually in really good shape overall for it's vintage. Equipped with 7-speed (freehub, though!) RSX STI shifters and 170mm road cranks, with 105 everything else. Traditional bend bars. Serfas saddle. Carbon threadless fork (also have the un-original chrome steel fork and quill that came with it, if you want, though the 600 headset is heavily indexed, you can have it too). Short-section Mavic/Wolber rims (good match) on matching 105 hubs. No pedals. Whole bike was stripped, cleaned, re-cabled, re-chained, and expertly put back together by me this weekend... ready to rock.

-Ben

benjaminbeckerich at the gmail dot com