Mark J. Ginsberg

can you use a hand hacksaw or a file to make a complete slit down the old seatpost to help cut it out?

if you can hammer it down into the seat tube, is there a way to hammer it up and out?
I'd imagine constructing a tool to hook onto the bottom of the seatpost then come up and out of the frame so you have a part to hammer.

Mark J. Ginsberg

Berkshire Ginsberg, LLC

Attorneys At Law

1216 SE Belmont St.

Portland, OR 97214

(503) 542-3000

Fax (503) 233-6874

markjginsberg@yahoo.com

www.bikesafetylaw.com

--- On Wed, 7/22/09, Chris Robinson wrote:

From: Chris Robinson
Subject: [OBRA Chat] Stuck Seatpost Question
To: obra@list.obra.org
Date: Wednesday, July 22, 2009, 4:15 PM

So I have a steel frame with a steel seat post stuck in it. I did my research and tried all recommended methods. I eventually hack sawed the top off and cut a slit in the seat post and rolled part of it in on itself and it still wouldn't budge. At that point I decided just to hammer it into the frame. Now my question is it safe to use an old seat post to hammer the stuck seat post down farther into the frame so that I can just put a new one on top of it? The only thing I see wrong with that is added weight but maybe I'm missing something...Any insight beyond my own teenage brain would be appreciated.

Thanks,

Chris Robinson
_______________________________________________
OBRA mailing list
obra@list.obra.org
http://list.obra.org/mailman/listinfo/obra
Unsubscribe: obra-unsubscribe@list.obra.org