Tubes!

Craig Austin

2005-11-30



Thomas, you have broken the code of silence. If any OBRA wives ever get

wind of this, you're a dead man.



Craig "What new bike?" Austin



-----Original Message-----

From: Thomas Hoffman [mailto:t.hoff-@verizon.net]

Sent: Tuesday, November 29, 2005 4:37 PM

To: RCJoh-@attglobal.net; ob-@topica.com

Subject: RE: [OBRA Chat] Tubes!







I found if you randomly hang old tubes in your garage, like cob webs,

and always make sure that your garage never has enough light. Your wife

will to afraid to go in the garage and not notice that you just dropped

a BOB trailer full of cash on a new road bike.



You know that cash! The "tiny" year end bonus that you may have

forgotten to tell her about. You remember the extra money she needed to

replace the tattered carpets in JR's bedroom, after he burned a whole in

the floor with the Chemistry set you just "Had to buy him" last year for

Christmas? You know "THAT" cash.





Thomas Hoffman

RE/MAX equity group

1975 NW 167th Place #100

Beaverton, OR 97006

503-495-5607 direct

www.tomshometeam.com



-----Original Message-----

From: RCJoh-@attglobal.net [mailto:RCJoh-@attglobal.net]

Sent: Tuesday, November 29, 2005 4:20 PM

To: ob-@topica.com

Subject: [OBRA Chat] Tubes!



With all these hot deals on used tubes I thought I'd offer some ideas on

what they can be used for once they have lost their pneumatic

containment capabilities.



Things I've used old tubes for:

Cut them into rubber bands to hold electronic parts during assembly.

Used them in strips to wrap and protect parts of my MTB from chain

gouging.

Wrapped the handle of my snow saw for better grip in cold and icey

conditions. Works for great for any hand tool.

Used them as shock cords to secure flexible hydraulic lines on heavy

equipment.

Used a short section as a sheath for the tool sharpening file I carry

when doing trial work so my pack doesn't get torn up.

For covering sections of locks or chains to keep them from damaging

paintwork.

Cut them into loops to secure the floppy strap ends on my packs.

Criss-crossed over BOB trailer hitches to dampen the trailer from

bouncing excessively.

To squeeze parts together for gluing during woodworking.

Screwed to the garage wall for a handy loop to keep door from blowing

closed.



So, don't just let them sit around. Use your imagination and put them

to work for another purpose!



Rick

PS- And still I have plenty available so no thanks in advance to all you

would-be donors.





Keith A. Prior wrote:

 

Believe it or not I have a collection of about 25

punctured tubes from my 5 years as a road cyclist

that I am SOMEDAY going to patch up and re use again.



Seriously here...if anyone wants about 25 700x23 tubes for free

so THEY can SOMEDAY patch them up and re use them they are welcome to

them

for again...FREE!



Sorry to undercut all you deal makers out there!



-Keith



-----Original Message-----

From: jo-@aracnet.com [mailto:jo-@aracnet.com]

Sent: Tuesday, November 29, 2005 11:16 AM

To: ob-@topica.com

Subject: RE: [OBRA Chat] FS-Tube





I have a case of pre-punctured 700x23 Presta tubes. 24 tubes to the

case.

I will sell for $2.00/tube, or $40.00/case.



If these do not go by end of day on Wed, they go out to eBay!



Sorry, local pickup only.



Brad Cockman, DC wrote:



 I have a patchkit, the glue's dried up but there's some sandpaper

and

  two small 1" diameter patches that are still good. $1.49 takes it,

shipping from Bend should be $3.85 Priority Mail. Buy James' tube,

Lisa's air, some of those valve caps and nuts and I think you'd be

safe

  for a ride. OH! And I have an underseat bag with a hole in it that

I'll

  throw in for nothing.



Lisa Winchester wrote:

 

I think I have some spare air in my pump that I can part with for

5

   cents per square inch. Please contact me ASAP before I put it on

Craig's List.

~Lisa









Re: FS-Tube

   jakebigham



   Nov 28, 2005 21:15 PST







--Apple-Mail-13-314536933Content-Transfer-Encoding:

7bitContent-Type:

   text/plain;charset=US-ASCII;delsp=yes;format=flowedOf interest to

you:I

   have some presta valve caps and some stem nuts that I will part

with

for

   $0.25 ea. or $4.00 for the lot. These are quality items with only

a

few

   miles on them. the valve caps come in both traditional black and

zesty

   orange/red! Please contact me soon as I will be sending them on to

Sotheby's if i don't get a local offer soon. -jakeOn Nov 28, 2005,

at

   5:45 PM, david baker wrote:









If you bring them to my house in Bend I will trade you for a used

pair

   of socks with small holes in the toe area that I patched with duct

tape.They are cool Defeet socks.They probably retail for $10.00,

so

the

   savings would offset your travel expenses.You gotta let me know

quick,

   or I am gonna list them on ebay if I do not hear from

you.thanx,David----- Original Message -----From: James GrittersTo:

OBRA

   PostSent: Monday, November 28, 2005 4:29 PMSubject: [OBRA Chat]

FS-TubeFor sale:     Slightly used tube. Had hole, but patched and

seems

   to hold air okay.Fits 700 c, but can be shoved into a 26 inch.Paid

3.99sell 1.49 OBOWill travel to Portland or beyond to

deliver.JamesTo

   respond to the whole group send to

ob-@topica.com. To respond to the list manager send to

cmu-@obra.org

To

   unsubscribe send to obra--@topica.comTo respond to the whole

group

   send to ob-@topica.com.To respond to the list manager send to

cmu-@obra.orgTo unsubscribe send to obra--@topica.com



-Lisa



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



Thomas Hoffman

2005-11-29







I found if you randomly hang old tubes in your garage, like cob webs, and

always make sure that your garage never has enough light. Your wife will to

afraid to go in the garage and not notice that you just dropped a BOB

trailer full of cash on a new road bike.



You know that cash! The "tiny" year end bonus that you may have forgotten to

tell her about. You remember the extra money she needed to replace the

tattered carpets in JR's bedroom, after he burned a whole in the floor with

the Chemistry set you just "Had to buy him" last year for Christmas? You

know "THAT" cash.





Thomas Hoffman

RE/MAX equity group

1975 NW 167th Place #100

Beaverton, OR 97006

503-495-5607 direct

www.tomshometeam.com



-----Original Message-----

From: RCJoh-@attglobal.net [mailto:RCJoh-@attglobal.net]

Sent: Tuesday, November 29, 2005 4:20 PM

To: ob-@topica.com

Subject: [OBRA Chat] Tubes!



With all these hot deals on used tubes I thought I'd offer some ideas on

what they can be used for once they have lost their pneumatic

containment capabilities.



Things I've used old tubes for:

Cut them into rubber bands to hold electronic parts during assembly.

Used them in strips to wrap and protect parts of my MTB from chain

gouging.

Wrapped the handle of my snow saw for better grip in cold and icey

conditions. Works for great for any hand tool.

Used them as shock cords to secure flexible hydraulic lines on heavy

equipment.

Used a short section as a sheath for the tool sharpening file I carry

when doing trial work so my pack doesn't get torn up.

For covering sections of locks or chains to keep them from damaging

paintwork.

Cut them into loops to secure the floppy strap ends on my packs.

Criss-crossed over BOB trailer hitches to dampen the trailer from

bouncing excessively.

To squeeze parts together for gluing during woodworking.

Screwed to the garage wall for a handy loop to keep door from blowing

closed.



So, don't just let them sit around. Use your imagination and put them

to work for another purpose!



Rick

PS- And still I have plenty available so no thanks in advance to all you

would-be donors.





Keith A. Prior wrote:

 

Believe it or not I have a collection of about 25

punctured tubes from my 5 years as a road cyclist

that I am SOMEDAY going to patch up and re use again.



Seriously here...if anyone wants about 25 700x23 tubes for free

so THEY can SOMEDAY patch them up and re use them they are welcome to

them

for again...FREE!



Sorry to undercut all you deal makers out there!



-Keith



-----Original Message-----

From: jo-@aracnet.com [mailto:jo-@aracnet.com]

Sent: Tuesday, November 29, 2005 11:16 AM

To: ob-@topica.com

Subject: RE: [OBRA Chat] FS-Tube





I have a case of pre-punctured 700x23 Presta tubes. 24 tubes to the

case.

I will sell for $2.00/tube, or $40.00/case.



If these do not go by end of day on Wed, they go out to eBay!



Sorry, local pickup only.



Brad Cockman, DC wrote:



 I have a patchkit, the glue's dried up but there's some sandpaper and

two small 1" diameter patches that are still good. $1.49 takes it,

shipping from Bend should be $3.85 Priority Mail. Buy James' tube,

Lisa's air, some of those valve caps and nuts and I think you'd be safe

for a ride. OH! And I have an underseat bag with a hole in it that I'll

throw in for nothing.



Lisa Winchester wrote:

 

I think I have some spare air in my pump that I can part with for 5

cents per square inch. Please contact me ASAP before I put it on

Craig's List.

~Lisa









Re: FS-Tube

   jakebigham



   Nov 28, 2005 21:15 PST







--Apple-Mail-13-314536933Content-Transfer-Encoding: 7bitContent-Type:

text/plain;charset=US-ASCII;delsp=yes;format=flowedOf interest to

you:I

   have some presta valve caps and some stem nuts that I will part with

for

   $0.25 ea. or $4.00 for the lot. These are quality items with only a

few

   miles on them. the valve caps come in both traditional black and zesty

orange/red! Please contact me soon as I will be sending them on to

Sotheby's if i don't get a local offer soon. -jakeOn Nov 28, 2005, at

5:45 PM, david baker wrote:









If you bring them to my house in Bend I will trade you for a used pair

of socks with small holes in the toe area that I patched with duct

tape.They are cool Defeet socks.They probably retail for $10.00, so

the

   savings would offset your travel expenses.You gotta let me know quick,

or I am gonna list them on ebay if I do not hear from

you.thanx,David----- Original Message -----From: James GrittersTo:

OBRA

   PostSent: Monday, November 28, 2005 4:29 PMSubject: [OBRA Chat]

FS-TubeFor sale:     Slightly used tube. Had hole, but patched and

seems

   to hold air okay.Fits 700 c, but can be shoved into a 26 inch.Paid

3.99sell 1.49 OBOWill travel to Portland or beyond to deliver.JamesTo

respond to the whole group send to

ob-@topica.com. To respond to the list manager send to cmu-@obra.org

To

   unsubscribe send to obra--@topica.comTo respond to the whole group

send to ob-@topica.com.To respond to the list manager send to

cmu-@obra.orgTo unsubscribe send to obra--@topica.com



-Lisa



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



RCJoh-@attglobal.net

2005-11-29



Even easier than string is to use metal hose clamps.

Thanks for the reminder, I've also used that to field repair blown

radiator hoses. Metal wire also works and is easy to tighten and secure

if you have some pliers...



Brian Engelen wrote:

 

Wrap old tube around frozen/burst water pipes. Reinforce with 50 wraps

of

strong string. Repair correctly at your leisure.



Brian Engelen



-----Original Message-----

From: RCJoh-@attglobal.net [mailto:RCJoh-@attglobal.net]

Sent: Tuesday, November 29, 2005 4:20 PM

To: ob-@topica.com

Subject: [OBRA Chat] Tubes!



With all these hot deals on used tubes I thought I'd offer some ideas on



what they can be used for once they have lost their pneumatic

containment capabilities.



Things I've used old tubes for:

Cut them into rubber bands to hold electronic parts during assembly.

Used them in strips to wrap and protect parts of my MTB from chain

gouging.

Wrapped the handle of my snow saw for better grip in cold and icey

conditions. Works for great for any hand tool.

Used them as shock cords to secure flexible hydraulic lines on heavy

equipment.

Used a short section as a sheath for the tool sharpening file I carry

when doing trial work so my pack doesn't get torn up.

For covering sections of locks or chains to keep them from damaging

paintwork.

Cut them into loops to secure the floppy strap ends on my packs.

Criss-crossed over BOB trailer hitches to dampen the trailer from

bouncing excessively.

To squeeze parts together for gluing during woodworking.

Screwed to the garage wall for a handy loop to keep door from blowing

closed.



So, don't just let them sit around. Use your imagination and put them

to work for another purpose!



Rick

PS- And still I have plenty available so no thanks in advance to all you



would-be donors.





Keith A. Prior wrote:

 

Believe it or not I have a collection of about 25

punctured tubes from my 5 years as a road cyclist

that I am SOMEDAY going to patch up and re use again.



Seriously here...if anyone wants about 25 700x23 tubes for free

so THEY can SOMEDAY patch them up and re use them they are welcome to

them

for again...FREE!



Sorry to undercut all you deal makers out there!



-Keith



-----Original Message-----

From: jo-@aracnet.com [mailto:jo-@aracnet.com]

Sent: Tuesday, November 29, 2005 11:16 AM

To: ob-@topica.com

Subject: RE: [OBRA Chat] FS-Tube





I have a case of pre-punctured 700x23 Presta tubes. 24 tubes to the

case.

I will sell for $2.00/tube, or $40.00/case.



If these do not go by end of day on Wed, they go out to eBay!



Sorry, local pickup only.



Brad Cockman, DC wrote:



 I have a patchkit, the glue's dried up but there's some sandpaper and

two small 1" diameter patches that are still good. $1.49 takes it,

shipping from Bend should be $3.85 Priority Mail. Buy James' tube,

Lisa's air, some of those valve caps and nuts and I think you'd be safe

for a ride. OH! And I have an underseat bag with a hole in it that I'll

throw in for nothing.



Lisa Winchester wrote:

 

I think I have some spare air in my pump that I can part with for 5

cents per square inch. Please contact me ASAP before I put it on

Craig's List.

~Lisa









Re: FS-Tube

   jakebigham



   Nov 28, 2005 21:15 PST







--Apple-Mail-13-314536933Content-Transfer-Encoding: 7bitContent-Type:

text/plain;charset=US-ASCII;delsp=yes;format=flowedOf interest to

you:I

   have some presta valve caps and some stem nuts that I will part with

for

   $0.25 ea. or $4.00 for the lot. These are quality items with only a

few

   miles on them. the valve caps come in both traditional black and zesty

orange/red! Please contact me soon as I will be sending them on to

Sotheby's if i don't get a local offer soon. -jakeOn Nov 28, 2005, at

5:45 PM, david baker wrote:









If you bring them to my house in Bend I will trade you for a used pair

of socks with small holes in the toe area that I patched with duct

tape.They are cool Defeet socks.They probably retail for $10.00, so

the

   savings would offset your travel expenses.You gotta let me know quick,

or I am gonna list them on ebay if I do not hear from

you.thanx,David----- Original Message -----From: James GrittersTo:

OBRA

   PostSent: Monday, November 28, 2005 4:29 PMSubject: [OBRA Chat]

FS-TubeFor sale:     Slightly used tube. Had hole, but patched and

seems

   to hold air okay.Fits 700 c, but can be shoved into a 26 inch.Paid

3.99sell 1.49 OBOWill travel to Portland or beyond to deliver.JamesTo

respond to the whole group send to

ob-@topica.com. To respond to the list manager send to cmu-@obra.org

To

   unsubscribe send to obra--@topica.comTo respond to the whole group

send to ob-@topica.com.To respond to the list manager send to

cmu-@obra.orgTo unsubscribe send to obra--@topica.com



-Lisa



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



Brian Engelen

2005-11-29



Wrap old tube around frozen/burst water pipes. Reinforce with 50 wraps of

strong string. Repair correctly at your leisure.



Brian Engelen



-----Original Message-----

From: RCJoh-@attglobal.net [mailto:RCJoh-@attglobal.net]

Sent: Tuesday, November 29, 2005 4:20 PM

To: ob-@topica.com

Subject: [OBRA Chat] Tubes!



With all these hot deals on used tubes I thought I'd offer some ideas on

what they can be used for once they have lost their pneumatic

containment capabilities.



Things I've used old tubes for:

Cut them into rubber bands to hold electronic parts during assembly.

Used them in strips to wrap and protect parts of my MTB from chain

gouging.

Wrapped the handle of my snow saw for better grip in cold and icey

conditions. Works for great for any hand tool.

Used them as shock cords to secure flexible hydraulic lines on heavy

equipment.

Used a short section as a sheath for the tool sharpening file I carry

when doing trial work so my pack doesn't get torn up.

For covering sections of locks or chains to keep them from damaging

paintwork.

Cut them into loops to secure the floppy strap ends on my packs.

Criss-crossed over BOB trailer hitches to dampen the trailer from

bouncing excessively.

To squeeze parts together for gluing during woodworking.

Screwed to the garage wall for a handy loop to keep door from blowing

closed.



So, don't just let them sit around. Use your imagination and put them

to work for another purpose!



Rick

PS- And still I have plenty available so no thanks in advance to all you

would-be donors.





Keith A. Prior wrote:

 

Believe it or not I have a collection of about 25

punctured tubes from my 5 years as a road cyclist

that I am SOMEDAY going to patch up and re use again.



Seriously here...if anyone wants about 25 700x23 tubes for free

so THEY can SOMEDAY patch them up and re use them they are welcome to

them

for again...FREE!



Sorry to undercut all you deal makers out there!



-Keith



-----Original Message-----

From: jo-@aracnet.com [mailto:jo-@aracnet.com]

Sent: Tuesday, November 29, 2005 11:16 AM

To: ob-@topica.com

Subject: RE: [OBRA Chat] FS-Tube





I have a case of pre-punctured 700x23 Presta tubes. 24 tubes to the

case.

I will sell for $2.00/tube, or $40.00/case.



If these do not go by end of day on Wed, they go out to eBay!



Sorry, local pickup only.



Brad Cockman, DC wrote:



 I have a patchkit, the glue's dried up but there's some sandpaper and

two small 1" diameter patches that are still good. $1.49 takes it,

shipping from Bend should be $3.85 Priority Mail. Buy James' tube,

Lisa's air, some of those valve caps and nuts and I think you'd be safe

for a ride. OH! And I have an underseat bag with a hole in it that I'll

throw in for nothing.



Lisa Winchester wrote:

 

I think I have some spare air in my pump that I can part with for 5

cents per square inch. Please contact me ASAP before I put it on

Craig's List.

~Lisa









Re: FS-Tube

   jakebigham



   Nov 28, 2005 21:15 PST







--Apple-Mail-13-314536933Content-Transfer-Encoding: 7bitContent-Type:

text/plain;charset=US-ASCII;delsp=yes;format=flowedOf interest to

you:I

   have some presta valve caps and some stem nuts that I will part with

for

   $0.25 ea. or $4.00 for the lot. These are quality items with only a

few

   miles on them. the valve caps come in both traditional black and zesty

orange/red! Please contact me soon as I will be sending them on to

Sotheby's if i don't get a local offer soon. -jakeOn Nov 28, 2005, at

5:45 PM, david baker wrote:









If you bring them to my house in Bend I will trade you for a used pair

of socks with small holes in the toe area that I patched with duct

tape.They are cool Defeet socks.They probably retail for $10.00, so

the

   savings would offset your travel expenses.You gotta let me know quick,

or I am gonna list them on ebay if I do not hear from

you.thanx,David----- Original Message -----From: James GrittersTo:

OBRA

   PostSent: Monday, November 28, 2005 4:29 PMSubject: [OBRA Chat]

FS-TubeFor sale:     Slightly used tube. Had hole, but patched and

seems

   to hold air okay.Fits 700 c, but can be shoved into a 26 inch.Paid

3.99sell 1.49 OBOWill travel to Portland or beyond to deliver.JamesTo

respond to the whole group send to

ob-@topica.com. To respond to the list manager send to cmu-@obra.org

To

   unsubscribe send to obra--@topica.comTo respond to the whole group

send to ob-@topica.com.To respond to the list manager send to

cmu-@obra.orgTo unsubscribe send to obra--@topica.com



-Lisa



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



RCJoh-@attglobal.net

2005-11-29



With all these hot deals on used tubes I thought I'd offer some ideas on

what they can be used for once they have lost their pneumatic

containment capabilities.



Things I've used old tubes for:

Cut them into rubber bands to hold electronic parts during assembly.

Used them in strips to wrap and protect parts of my MTB from chain

gouging.

Wrapped the handle of my snow saw for better grip in cold and icey

conditions. Works for great for any hand tool.

Used them as shock cords to secure flexible hydraulic lines on heavy

equipment.

Used a short section as a sheath for the tool sharpening file I carry

when doing trial work so my pack doesn't get torn up.

For covering sections of locks or chains to keep them from damaging

paintwork.

Cut them into loops to secure the floppy strap ends on my packs.

Criss-crossed over BOB trailer hitches to dampen the trailer from

bouncing excessively.

To squeeze parts together for gluing during woodworking.

Screwed to the garage wall for a handy loop to keep door from blowing

closed.



So, don't just let them sit around. Use your imagination and put them

to work for another purpose!



Rick

PS- And still I have plenty available so no thanks in advance to all you

would-be donors.





Keith A. Prior wrote:

 

Believe it or not I have a collection of about 25

punctured tubes from my 5 years as a road cyclist

that I am SOMEDAY going to patch up and re use again.



Seriously here...if anyone wants about 25 700x23 tubes for free

so THEY can SOMEDAY patch them up and re use them they are welcome to

them

for again...FREE!



Sorry to undercut all you deal makers out there!



-Keith



-----Original Message-----

From: jo-@aracnet.com [mailto:jo-@aracnet.com]

Sent: Tuesday, November 29, 2005 11:16 AM

To: ob-@topica.com

Subject: RE: [OBRA Chat] FS-Tube





I have a case of pre-punctured 700x23 Presta tubes. 24 tubes to the

case.

I will sell for $2.00/tube, or $40.00/case.



If these do not go by end of day on Wed, they go out to eBay!



Sorry, local pickup only.



Brad Cockman, DC wrote:



 I have a patchkit, the glue's dried up but there's some sandpaper and

two small 1" diameter patches that are still good. $1.49 takes it,

shipping from Bend should be $3.85 Priority Mail. Buy James' tube,

Lisa's air, some of those valve caps and nuts and I think you'd be safe

for a ride. OH! And I have an underseat bag with a hole in it that I'll

throw in for nothing.



Lisa Winchester wrote:

 

I think I have some spare air in my pump that I can part with for 5

cents per square inch. Please contact me ASAP before I put it on

Craig's List.

~Lisa









Re: FS-Tube

   jakebigham



   Nov 28, 2005 21:15 PST







--Apple-Mail-13-314536933Content-Transfer-Encoding: 7bitContent-Type:

text/plain;charset=US-ASCII;delsp=yes;format=flowedOf interest to you:I

have some presta valve caps and some stem nuts that I will part with for

$0.25 ea. or $4.00 for the lot. These are quality items with only a few

miles on them. the valve caps come in both traditional black and zesty

orange/red! Please contact me soon as I will be sending them on to

Sotheby's if i don't get a local offer soon. -jakeOn Nov 28, 2005, at

5:45 PM, david baker wrote:









If you bring them to my house in Bend I will trade you for a used pair

of socks with small holes in the toe area that I patched with duct

tape.They are cool Defeet socks.They probably retail for $10.00, so the

savings would offset your travel expenses.You gotta let me know quick,

or I am gonna list them on ebay if I do not hear from

you.thanx,David----- Original Message -----From: James GrittersTo: OBRA

PostSent: Monday, November 28, 2005 4:29 PMSubject: [OBRA Chat]

FS-TubeFor sale:     Slightly used tube. Had hole, but patched and seems

to hold air okay.Fits 700 c, but can be shoved into a 26 inch.Paid

3.99sell 1.49 OBOWill travel to Portland or beyond to deliver.JamesTo

respond to the whole group send to

ob-@topica.com. To respond to the list manager send to cmu-@obra.org To

unsubscribe send to obra--@topica.comTo respond to the whole group

send to ob-@topica.com.To respond to the list manager send to

cmu-@obra.orgTo unsubscribe send to obra--@topica.com



-Lisa



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com



To respond to the whole group send to ob-@topica.com.

To respond to the list manager send to cmur-@obra.org

To unsubscribe send to obra-uns-@topica.com