cross pedal recommendation

Joel Morrissette

2008-09-18

Roger-
Once the Crank Brothers pedals are broken in, they are very easy to get out
of. Until then, they can be pretty tight, which appears to be due to both
the new cleats as well as the pedal springs and surfaces. I think I've only
gotten stuck in one on a dismount once, and that was with a new set of
eggbeaters during a really sloppy race.

-Joel

2008/9/18 Roger Joys (Mail Lists)

> I like Crank Brothers in general and have them on all my fixed gear bikes
> (fodder for "You know you are addicted" thread), however, I had some issues
> with the float and ease of dismount with them. I switched to Shimano XTR and
> problem solved. Bear in mind that I've been trying cross a whopping 3 weeks
> now, so I am sure this has more to do with technique than hardware, so take
> this as another data point more than a seasoned veteran's testimonial.
>
>
>
> The positive side to the crank bro system is that the cleats can be
> reversed to give less float. However for this newbie, the Shimano XTR have
> adequate float and a more positive feel of being "in or out" in addition to
> not requiring a yoga move to dismount.
>
>
>
> -r
>
>
>
>
>
>
>
>
>
> Roger Joys
>
> Portland, OR
>
>
>
> [image: bicycle-district-spoke-card-3]
>
>
>
>
>
>
>
>
>
>
>
> *From:* obra-bounces@list.obra.org [mailto:obra-bounces@list.obra.org] *On
> Behalf Of *Debra Windus
> *Sent:* Thursday, September 18, 2008 12:25 AM
> *To:* obra@list.obra.org; Evan Plews
> *Subject:* Re: [OBRA Chat] cross pedal recommendation
>
>
>
> I like them, too. Used for cross and mountain biking. And for a little
> more money you can get the teflon coated model, which sheds mud and dust
> very well.
>
> --- On *Wed, 9/17/08, Evan Plews * wrote:
>
> From: Evan Plews
> Subject: Re: [OBRA Chat] cross pedal recommendation
> To: obra@list.obra.org
> Date: Wednesday, September 17, 2008, 9:32 PM
>
> Shimano SPD. The first, and still the best. I have used all the other
> pedals out there and always come back to SPDs for the nastiness. I still
> have some M525 from 1992 that spin smoother than any of the competition.
> Real bearings, real seals, steel cleats that don't wear out in a week--what
> more do you need?
>
> The real secret is that their cheapest model works just like the XTR with
> just a little more weight!
> ------------------------------
>
> See how Windows Mobile brings your life together—at home, work, or on the
> go. See Now
>
> _______________________________________________
>
> OBRA mailing list
>
> obra@list.obra.org
>
> http://list.obra.org/mailman/listinfo/obra
>
> Unsubscribe: obra-unsubscribe@list.obra.org
>
>
>
> _______________________________________________
> OBRA mailing list
> obra@list.obra.org
> http://list.obra.org/mailman/listinfo/obra
> Unsubscribe: obra-unsubscribe@list.obra.org
>
>

--
__o "It never gets easier,
_ \<_ you just go faster."
(_)/(_) -- Greg LeMond


Roger Joys (Mail Lists)

2008-09-18

I like Crank Brothers in general and have them on all my fixed gear bikes
(fodder for "You know you are addicted" thread), however, I had some issues
with the float and ease of dismount with them. I switched to Shimano XTR and
problem solved. Bear in mind that I've been trying cross a whopping 3 weeks
now, so I am sure this has more to do with technique than hardware, so take
this as another data point more than a seasoned veteran's testimonial.

The positive side to the crank bro system is that the cleats can be
reversed to give less float. However for this newbie, the Shimano XTR have
adequate float and a more positive feel of being "in or out" in addition to
not requiring a yoga move to dismount.

-r

Roger Joys

Portland, OR

bicycle-district-spoke-card-3

From: obra-bounces@list.obra.org [mailto:obra-bounces@list.obra.org] On
Behalf Of Debra Windus
Sent: Thursday, September 18, 2008 12:25 AM
To: obra@list.obra.org; Evan Plews
Subject: Re: [OBRA Chat] cross pedal recommendation

I like them, too. Used for cross and mountain biking. And for a little more
money you can get the teflon coated model, which sheds mud and dust very
well.

--- On Wed, 9/17/08, Evan Plews wrote:

From: Evan Plews
Subject: Re: [OBRA Chat] cross pedal recommendation
To: obra@list.obra.org
Date: Wednesday, September 17, 2008, 9:32 PM

Shimano SPD. The first, and still the best. I have used all the other pedals
out there and always come back to SPDs for the nastiness. I still have some
M525 from 1992 that spin smoother than any of the competition. Real
bearings, real seals, steel cleats that don't wear out in a week--what more
do you need?

The real secret is that their cheapest model works just like the XTR with
just a little more weight!

_____

See how Windows Mobile brings your life together-at home, work, or on the
go. See Now

_______________________________________________
OBRA mailing list
obra@list.obra.org
http://list.obra.org/mailman/listinfo/obra
Unsubscribe: obra-unsubscribe@list.obra.org


Debra Windus

2008-09-18

I like them, too.  Used for cross and mountain biking. And for a little more money you can get the teflon coated model, which sheds mud and dust very well.

--- On Wed, 9/17/08, Evan Plews wrote:

From: Evan Plews
Subject: Re: [OBRA Chat] cross pedal recommendation
To: obra@list.obra.org
Date: Wednesday, September 17, 2008, 9:32 PM

#yiv655730466 .hmmessage P
{
margin:0px;padding:0px;}
#yiv655730466 {
FONT-SIZE:10pt;FONT-FAMILY:Tahoma;}

Shimano SPD. The first, and still the best. I have used all the other pedals out there and always come back to SPDs for the nastiness. I still have some M525 from 1992 that spin smoother than any of the competition. Real bearings, real seals, steel cleats that don't wear out in a week--what more do you need?
 
The real secret is that their cheapest model works just like the XTR with just a little more weight!

See how Windows Mobile brings your life together—at home, work, or on the go. See Now _______________________________________________
OBRA mailing list
obra@list.obra.org
http://list.obra.org/mailman/listinfo/obra
Unsubscribe: obra-unsubscribe@list.obra.org


Evan Plews

2008-09-17

Shimano SPD. The first, and still the best. I have used all the other pedals out there and always come back to SPDs for the nastiness. I still have some M525 from 1992 that spin smoother than any of the competition. Real bearings, real seals, steel cleats that don't wear out in a week--what more do you need?

The real secret is that their cheapest model works just like the XTR with just a little more weight!
_________________________________________________________________
See how Windows Mobile brings your life together—at home, work, or on the go.
http://clk.atdmt.com/MRT/go/msnnkwxp1020093182mrt/direct/01/


Mike Olson

2008-09-17

I have used the Crank Brothers Candy and some lower end Shimano SPD pedals. I just switched to the Time ATAC xs pedals and I think they work way better. Easy entry with some float and 2 options for exit angle. They are easily the best investment I have made for my cross bike.