Dan Werle
- 1 set of Shimano 105 5700 10-speed black shifters/brake levers in good
condition: $125
Notes: The left lever has a 5-8 mm scuff mark on the inferior, lateral
aspect due to a crash. I've used the levers with no problems for many
months since the crash.
- 2 Shimano 105 5700 10-speed 11-28 cassettes, each in good-to-very good
condition; each include two lockrings: $25 per cassette
Notes: These have been well cared-for; they show pretty similar wear and
neither has any mechanical or cosmetic faults.
- 1 Shimano 105 5700 black clamp-on 31.8 front derailleur with 31.8 - 28.6
shim in good-to-very good condition: $20
Notes: No problems, well cared-for and has no mechanical faults. There is
one 5 mm X 0.5 mma scratch where the paint/anodizing is gone.
- 1 Shimano 105 5700 black rear deraiileur: $40
Notes: I *think *this is a medium-cage derailleur; I used it with the
above-listed 11-28 cassettes. The pulleys were replaced with Shimano
pulleys in December, 2012, and the bike has been ridden for roughly 300
miles since then. There are no mechanical or cosmetic defects in it. The
derailleur suffered no harm during the crash that "injured" the left
shifter above.
- 1 Paul Neo-Retro black cantilever brake with a Paul Moon Unit (straddle
carrier) and a (Rick) Hunter Nugz straddle cable barrel adjuster - all in
good-to-very good shape: $30
Notes: This is one brake for one wheel with a Moon Unit and Hunter straddle
cable barrel adjuster included. The barrel adjuster was developed by Rick
Hunter specifically for use with the Paul cantilever brakes. The brake pads
included are Kool Stop salmon Eagle II's. All mounting hardware (not the
straddle cable, though) is included. They've got about 20-30% of their life
left in them before they will need to be replaced. This is the Paul brake
that is most often used on the front of a cantilever-compatible cyclo-cross
bike.
- 1 Paul Touring Canti black cantilever brake with a Paul Moon Unit
(straddle carrier) and a (Rick) Hunter Nugz straddle cable barrel adjuster
- all in good-to-very good shape: $30
Notes: This is one brake for one wheel with a Moon Unit and Hunter straddle
cable barrel adjuster included. The barrel adjuster was developed by Rick
Hunter specifically for use with the Paul cantilever brakes. The brake pads
included are Kool Stop salmon Eagle II's. All mounting hardware (not the
straddle cable, though) is included. They've got about 20-30% of their life
left in them before they will need to be replaced. This is the Paul brake
that is most often used on the rear of a cantilever-compatible cyclo-cross
bike.
The chainrings listed below are all black and all are in fair-to-good
condition. Each chainring is $10. Please note that the Paul, White
Industries, & Middleburn chainrings are propietary and will only work with
the respective manufacturers' cranks.
Paul (with circles): 48 (tooth)
White Industries: 52 (outside), 44 (outside), 38 (inside), 34 (inside)
Speciatites TA Hegoa (130 BCD compatible with 9/10 speed Shimano systems):
50 (outside), 42 (inside), 38 (inside)
Middleburn: 42 (outer), 29 (inner) Duo rings compatible with the Middleburn
RS-7 or RS-8 cranks that feature the three-bolt system
I'm selling these to help fund upcoming bike changes. I'm in mid-Northeast
Portland, but am happy to work with people outside of the area, if
necessary. I'm also happy to send along photos of any of the items.
Please e-mail me off-list if interested.
Here are a few Web sites to use for reference on the items:
www.shimano.com
www.paulcomp.com
www.whiteind.com
http://www.specialites-ta.com
www.middleburn.co.uk
http://www.flickr.com/photos/huntercycles/5427848989/in/set-72157606185400166
Thanks.
danwerle(at)gmail(dot)com