Steve Long
Okay so seriously on the "I want a really good deal on a brand new cassette..."
I have always wondered why those people don't just try this new fangled Google thing.
Sent from my Samsung Infuse Smartphone
Rick Johnson wrote:
>I think making membership a requirement for being on this list is a
>great idea!
>
>I was already under the impression that it was. Now the huge volume of
>classified spam makes sense, as well as the daily "I want a good deal on
>a brand new Durace cassette but I'm too lazy to go to the bike shop or
>buy one online" messages.
>
>I would go so far as to say classifieds should be a completely separate
>list from OBRA chat - but it's probably too late for that.
>
>Rick
>
>Rick Johnson
>Bend Oregon
>
>* * *
>
>On 9/3/2013 9:22 AM, Candi Murray wrote:
>> So far it looks like all of these incompetent unsubscribers are not
>> members. They signed on to sell something and then were not bright
>> enough to sign off.. Maybe we need to make membership a requirement
>> for subscription?
>>
>> Candi
>>
>> On Sep 3, 2013, at 8:51 AM, Kevin > > wrote:
>>
>>>
>>> *
>>> How To Unsubscribe:
>>>
>>> To unsubscribe from this service you must first purchase a
>>> Craft-O-Matic Adjustable Subscription Cancellation Unit. The unit
>>> can be obtained from most hardware stores and dental clinics. Be
>>> sure to obtain the proper permits to operate the unit from the
>>> Nuclear Regulatory Commission and the Food and Drug
>>> Administration in Washington D.C. USA.
>>>
>>> Be sure to carefully unpack the kit and place each component in
>>> its accompanying mesh safety bag. Mount the Pershing DF4
>>> mesinator on top of the perforated Gerring Mach 77 refibulator
>>> and attach them using the eight-millimeter torque fork. Be sure
>>> that the refibulator is mounted at a 66 degree angle and properly
>>> dispersed so that it is flush with the curved section of the
>>> Pyrex thistle tube. Place the four sections of the triangular
>>> separation gear into the posture cylinder and lock them into
>>> place using the band aid adhesive strip. Insert the wiggling pin
>>> into the wobbling hole, making sure that it seated correctly.
>>> Place the D cell battery and the eleven 9 volt batteries in the
>>> power chamber.
>>>
>>> The device should be calibrated before operation using the
>>> optional digital corkscrew accessory pack prior to operation.
>>> Insert the digital corkscrew through the electronic combustion
>>> service chamber using caution not to touch the reinforced
>>> tungsten igniter control module and quickly turn the inverter
>>> drive to 28.6 degrees. Turn the Craft-O-Matic Adjustable
>>> Subscription Cancellation Unit upside down and hit the bottom
>>> plate with a 48-ounce ball-peen hammer while shaking the unit
>>> vigorously. Force open the door to the incineration valve
>>> compartment and set the pressure gauge to 719 psi. Close the door
>>> and seal it shut with duct tape. The unit should now be properly
>>> calibrated and ready to use.
>>>
>>> Before activating the Craft-O-Matic Adjustable Subscription
>>> Cancellation Unit, you must first elevate it to a height of 229
>>> feet above sea level to insure that the unit receives the proper
>>> oxygen level and barometric pressure. Point the aerial to 17
>>> degrees north by northeast to within the parameters of the
>>> Telstar GS-2 weather satellite and apply pressure to the wing
>>> shaft on the southern most section of the modular accelerator.
>>> Using the special ratchet adapter supplied with the unit, rotate
>>> the heater core to the "on" position.
>>>
>>> The "on" position has been obtained when the green light begins
>>> to flash, signifying that the red light is about to go off. Once
>>> the red light is off, flip the toggle switch labeled "ON/OFF" to
>>> the "ON" position and count to 47 before logging on to the system.
>>>
>>> Logon using your username and password and wait for the prompt.
>>> Once prompted you must check the box with the appropriate action
>>> you wish to take and then press the pressure release button and
>>> turn off the compressor while turning the hand crank at 231
>>> meters per minute. Next, press control, alt, delete, caps lock,
>>> shift, number lock, escape and tab simultaneously. Press enter.
>>>
>>> You will have one second to complete the procedure. If you fail
>>> to respond in the time limit allowed, simply purchase a new
>>> Craft-O-Matic Adjustable Subscription Cancellation Unit and start
>>> from the beginning.
>>>
>>> Please remember that this is the only way we will accept for you
>>> to unsubscribe from this service. We have made every attempt to
>>> simplify the procedure for your convenience. Failure to comply
>>> with the unsubscribe policy will result in immediate termination
>>> of your subscription so please follow the above directions closely.
>>>
>>> Or just follow the instructions in the footer at the bottom of every
>>> email to this listserv.
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Christopher O. Williams >> >
>>> *To:* obra@list.obra.org
>>> *Sent:* Tuesday, September 3, 2013 4:42 AM
>>> *Subject:* [OBRA Chat]
>>> UNSUBSCRIBE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>>>
>>> UNSUBSCRIBE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>>>
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://list.obra.org/mailman/listinfo/obra
>>> or, via email, send a message with subject or body 'help' to
>>> obra-request@list.obra.org
>>>
>>>
>>> _______________________________________________
>>> OBRA mailing list
>>> obra@list.obra.org
>>> http://list.obra.org/mailman/listinfo/obra
>>> Unsubscribe: obra-unsubscribe@list.obra.org
>>>
>>
>>
>> _______________________________________________
>> OBRA mailing list
>> obra@list.obra.org
>> http://list.obra.org/mailman/listinfo/obra
>> Unsubscribe: obra-unsubscribe@list.obra.org
>
>
>_______________________________________________
>OBRA mailing list
>obra@list.obra.org
>http://list.obra.org/mailman/listinfo/obra
>Unsubscribe: obra-unsubscribe@list.obra.org